D7net
Home
Console
Upload
information
Create File
Create Folder
About
Tools
:
/
usr
/
lib64
/
perl5
/
CORE
/
Filename :
regcomp.h
back
Copy
/* regcomp.h * * Copyright (C) 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, * 2000, 2001, 2002, 2003, 2005, 2006, 2007, by Larry Wall and others * * You may distribute under the terms of either the GNU General Public * License or the Artistic License, as specified in the README file. * */ #include "regcharclass.h" /* Convert branch sequences to more efficient trie ops? */ #define PERL_ENABLE_TRIE_OPTIMISATION 1 /* Be really aggressive about optimising patterns with trie sequences? */ #define PERL_ENABLE_EXTENDED_TRIE_OPTIMISATION 1 /* Should the optimiser take positive assertions into account? */ #define PERL_ENABLE_POSITIVE_ASSERTION_STUDY 0 /* Not for production use: */ #define PERL_ENABLE_EXPERIMENTAL_REGEX_OPTIMISATIONS 0 /* Activate offsets code - set to if 1 to enable */ #ifdef DEBUGGING #define RE_TRACK_PATTERN_OFFSETS #endif /* * The "internal use only" fields in regexp.h are present to pass info from * compile to execute that permits the execute phase to run lots faster on * simple cases. They are: * * regstart sv that must begin a match; NULL if none obvious * reganch is the match anchored (at beginning-of-line only)? * regmust string (pointer into program) that match must include, or NULL * [regmust changed to SV* for bminstr()--law] * regmlen length of regmust string * [regmlen not used currently] * * Regstart and reganch permit very fast decisions on suitable starting points * for a match, cutting down the work a lot. Regmust permits fast rejection * of lines that cannot possibly match. The regmust tests are costly enough * that pregcomp() supplies a regmust only if the r.e. contains something * potentially expensive (at present, the only such thing detected is * or + * at the start of the r.e., which can involve a lot of backup). Regmlen is * supplied because the test in pregexec() needs it and pregcomp() is computing * it anyway. * [regmust is now supplied always. The tests that use regmust have a * heuristic that disables the test if it usually matches.] * * [In fact, we now use regmust in many cases to locate where the search * starts in the string, so if regback is >= 0, the regmust search is never * wasted effort. The regback variable says how many characters back from * where regmust matched is the earliest possible start of the match. * For instance, /[a-z].foo/ has a regmust of 'foo' and a regback of 2.] */ /* * Structure for regexp "program". This is essentially a linear encoding * of a nondeterministic finite-state machine (aka syntax charts or * "railroad normal form" in parsing technology). Each node is an opcode * plus a "next" pointer, possibly plus an operand. "Next" pointers of * all nodes except BRANCH implement concatenation; a "next" pointer with * a BRANCH on both ends of it is connecting two alternatives. (Here we * have one of the subtle syntax dependencies: an individual BRANCH (as * opposed to a collection of them) is never concatenated with anything * because of operator precedence.) The operand of some types of node is * a literal string; for others, it is a node leading into a sub-FSM. In * particular, the operand of a BRANCH node is the first node of the branch. * (NB this is *not* a tree structure: the tail of the branch connects * to the thing following the set of BRANCHes.) The opcodes are defined * in regnodes.h which is generated from regcomp.sym by regcomp.pl. */ /* * A node is one char of opcode followed by two chars of "next" pointer. * "Next" pointers are stored as two 8-bit pieces, high order first. The * value is a positive offset from the opcode of the node containing it. * An operand, if any, simply follows the node. (Note that much of the * code generation knows about this implicit relationship.) * * Using two bytes for the "next" pointer is vast overkill for most things, * but allows patterns to get big without disasters. * * [The "next" pointer is always aligned on an even * boundary, and reads the offset directly as a short.] */ /* This is the stuff that used to live in regexp.h that was truly private to the engine itself. It now lives here. */ typedef struct regexp_internal { int name_list_idx; /* Optional data index of an array of paren names */ union { U32 *offsets; /* offset annotations 20001228 MJD data about mapping the program to the string - offsets[0] is proglen when this is used */ U32 proglen; } u; regnode *regstclass; /* Optional startclass as identified or constructed by the optimiser */ struct reg_data *data; /* Additional miscellaneous data used by the program. Used to make it easier to clone and free arbitrary data that the regops need. Often the ARG field of a regop is an index into this structure */ struct reg_code_blocks *code_blocks;/* positions of literal (?{}) */ regnode program[1]; /* Unwarranted chumminess with compiler. */ } regexp_internal; #define RXi_SET(x,y) (x)->pprivate = (void*)(y) #define RXi_GET(x) ((regexp_internal *)((x)->pprivate)) #define RXi_GET_DECL(r,ri) regexp_internal *ri = RXi_GET(r) /* * Flags stored in regexp->intflags * These are used only internally to the regexp engine * * See regexp.h for flags used externally to the regexp engine */ #define RXp_INTFLAGS(rx) ((rx)->intflags) #define RX_INTFLAGS(prog) RXp_INTFLAGS(ReANY(prog)) #define PREGf_SKIP 0x00000001 #define PREGf_IMPLICIT 0x00000002 /* Converted .* to ^.* */ #define PREGf_NAUGHTY 0x00000004 /* how exponential is this pattern? */ #define PREGf_VERBARG_SEEN 0x00000008 #define PREGf_CUTGROUP_SEEN 0x00000010 #define PREGf_USE_RE_EVAL 0x00000020 /* compiled with "use re 'eval'" */ /* these used to be extflags, but are now intflags */ #define PREGf_NOSCAN 0x00000040 /* spare */ #define PREGf_GPOS_SEEN 0x00000100 #define PREGf_GPOS_FLOAT 0x00000200 #define PREGf_ANCH_MBOL 0x00000400 #define PREGf_ANCH_SBOL 0x00000800 #define PREGf_ANCH_GPOS 0x00001000 #define PREGf_RECURSE_SEEN 0x00002000 #define PREGf_ANCH \ ( PREGf_ANCH_SBOL | PREGf_ANCH_GPOS | PREGf_ANCH_MBOL ) /* this is where the old regcomp.h started */ struct regnode_string { U8 str_len; U8 type; U16 next_off; char string[1]; }; /* Argument bearing node - workhorse, arg1 is often for the data field */ struct regnode_1 { U8 flags; U8 type; U16 next_off; U32 arg1; }; /* Similar to a regnode_1 but with an extra signed argument */ struct regnode_2L { U8 flags; U8 type; U16 next_off; U32 arg1; I32 arg2; }; /* 'Two field' -- Two 16 bit unsigned args */ struct regnode_2 { U8 flags; U8 type; U16 next_off; U16 arg1; U16 arg2; }; /* This give the number of code points that can be in the bitmap of an ANYOF * node. The shift number must currently be one of: 8..12. It can't be less * than 8 (256) because some code relies on it being at least that. Above 12 * (4096), and you start running into warnings that some data structure widths * have been exceeded, though the test suite as of this writing still passes * for up through 16, which is as high as anyone would ever want to go, * encompassing all of the Unicode BMP, and thus including all the economically * important world scripts. At 12 most of them are: including Arabic, * Cyrillic, Greek, Hebrew, Indian subcontinent, Latin, and Thai; but not Han, * Japanese, nor Korean. (The regarglen structure in regnodes.h is a U8, and * the trie types TRIEC and AHOCORASICKC are larger than U8 for shift values * below above 12.) Be sure to benchmark before changing, as larger sizes do * significantly slow down the test suite */ #define NUM_ANYOF_CODE_POINTS (1 << 8) #define ANYOF_BITMAP_SIZE (NUM_ANYOF_CODE_POINTS / 8) /* 8 bits/Byte */ /* Note that these form structs which are supersets of the next smaller one, by * appending fields. Alignment problems can occur if one of those optional * fields requires stricter alignment than the base struct. And formal * parameters that can really be two or more of the structs should be * declared as the smallest one it could be. See commit message for * 7dcac5f6a5195002b55c935ee1d67f67e1df280b. Regnode allocation is done * without regard to alignment, and changing it to would also require changing * the code that inserts and deletes regnodes. The basic single-argument * regnode has a U32, which is what reganode() allocates as a unit. Therefore * no field can require stricter alignment than U32. */ /* also used by trie */ struct regnode_charclass { U8 flags; U8 type; U16 next_off; U32 arg1; /* set by set_ANYOF_arg() */ char bitmap[ANYOF_BITMAP_SIZE]; /* only compile-time */ }; /* has runtime (locale) \d, \w, ..., [:posix:] classes */ struct regnode_charclass_class { U8 flags; /* ANYOF_MATCHES_POSIXL bit must go here */ U8 type; U16 next_off; U32 arg1; char bitmap[ANYOF_BITMAP_SIZE]; /* both compile-time ... */ U32 classflags; /* and run-time */ }; /* A synthetic start class (SSC); is a regnode_charclass_posixl_fold, plus an * extra SV*, used only during its construction and which is not used by * regexec.c. Note that the 'next_off' field is unused, as the SSC stands * alone, so there is never a next node. Also, there is no alignment issue, * because these are declared or allocated as a complete unit so the compiler * takes care of alignment. This is unlike the other regnodes which are * allocated in terms of multiples of a single-argument regnode. SSC nodes can * have a pointer field because there is no alignment issue, and because it is * set to NULL after construction, before any cloning of the pattern */ struct regnode_ssc { U8 flags; /* ANYOF_MATCHES_POSIXL bit must go here */ U8 type; U16 next_off; U32 arg1; char bitmap[ANYOF_BITMAP_SIZE]; /* both compile-time ... */ U32 classflags; /* ... and run-time */ /* Auxiliary, only used during construction; NULL afterwards: list of code * points matched */ SV* invlist; }; /* We take advantage of 'next_off' not otherwise being used in the SSC by * actually using it: by setting it to 1. This allows us to test and * distinguish between an SSC and other ANYOF node types, as 'next_off' cannot * otherwise be 1, because it is the offset to the next regnode expressed in * units of regnodes. Since an ANYOF node contains extra fields, it adds up * to 12 regnode units on 32-bit systems, (hence the minimum this can be (if * not 0) is 11 there. Even if things get tightly packed on a 64-bit system, * it still would be more than 1. */ #define set_ANYOF_SYNTHETIC(n) STMT_START{ OP(n) = ANYOF; \ NEXT_OFF(n) = 1; \ } STMT_END #define is_ANYOF_SYNTHETIC(n) (PL_regkind[OP(n)] == ANYOF && NEXT_OFF(n) == 1) /* XXX fix this description. Impose a limit of REG_INFTY on various pattern matching operations to limit stack growth and to avoid "infinite" recursions. */ /* The default size for REG_INFTY is I16_MAX, which is the same as SHORT_MAX (see perl.h). Unfortunately I16 isn't necessarily 16 bits (see handy.h). On the Cray C90, sizeof(short)==4 and hence I16_MAX is ((1<<31)-1), while on the Cray T90, sizeof(short)==8 and I16_MAX is ((1<<63)-1). To limit stack growth to reasonable sizes, supply a smaller default. --Andy Dougherty 11 June 1998 */ #if SHORTSIZE > 2 # ifndef REG_INFTY # define REG_INFTY ((1<<15)-1) # endif #endif #ifndef REG_INFTY # define REG_INFTY I16_MAX #endif #define ARG_VALUE(arg) (arg) #define ARG__SET(arg,val) ((arg) = (val)) #undef ARG #undef ARG1 #undef ARG2 #define ARG(p) ARG_VALUE(ARG_LOC(p)) #define ARG1(p) ARG_VALUE(ARG1_LOC(p)) #define ARG2(p) ARG_VALUE(ARG2_LOC(p)) #define ARG2L(p) ARG_VALUE(ARG2L_LOC(p)) #define ARG_SET(p, val) ARG__SET(ARG_LOC(p), (val)) #define ARG1_SET(p, val) ARG__SET(ARG1_LOC(p), (val)) #define ARG2_SET(p, val) ARG__SET(ARG2_LOC(p), (val)) #define ARG2L_SET(p, val) ARG__SET(ARG2L_LOC(p), (val)) #undef NEXT_OFF #undef NODE_ALIGN #define NEXT_OFF(p) ((p)->next_off) #define NODE_ALIGN(node) /* the following define was set to 0xde in 075abff3 * as part of some linting logic. I have set it to 0 * as otherwise in every place where we /might/ set flags * we have to set it 0 explicitly, which duplicates * assignments and IMO adds an unacceptable level of * surprise to working in the regex engine. If this * is changed from 0 then at the very least make sure * that SBOL for /^/ sets the flags to 0 explicitly. * -- Yves */ #define NODE_ALIGN_FILL(node) ((node)->flags = 0) #define SIZE_ALIGN NODE_ALIGN #undef OP #undef OPERAND #undef MASK #undef STRING #define OP(p) ((p)->type) #define FLAGS(p) ((p)->flags) /* Caution: Doesn't apply to all \ regnode types. For some, it's the \ character set of the regnode */ #define OPERAND(p) (((struct regnode_string *)p)->string) #define MASK(p) ((char*)OPERAND(p)) #define STR_LEN(p) (((struct regnode_string *)p)->str_len) #define STRING(p) (((struct regnode_string *)p)->string) #define STR_SZ(l) ((l + sizeof(regnode) - 1) / sizeof(regnode)) #define NODE_SZ_STR(p) (STR_SZ(STR_LEN(p))+1) #undef NODE_ALIGN #undef ARG_LOC #undef NEXTOPER #undef PREVOPER #define NODE_ALIGN(node) #define ARG_LOC(p) (((struct regnode_1 *)p)->arg1) #define ARG1_LOC(p) (((struct regnode_2 *)p)->arg1) #define ARG2_LOC(p) (((struct regnode_2 *)p)->arg2) #define ARG2L_LOC(p) (((struct regnode_2L *)p)->arg2) #define NODE_STEP_REGNODE 1 /* sizeof(regnode)/sizeof(regnode) */ #define EXTRA_STEP_2ARGS EXTRA_SIZE(struct regnode_2) #define NODE_STEP_B 4 #define NEXTOPER(p) ((p) + NODE_STEP_REGNODE) #define PREVOPER(p) ((p) - NODE_STEP_REGNODE) #define FILL_ADVANCE_NODE(ptr, op) STMT_START { \ (ptr)->type = op; (ptr)->next_off = 0; (ptr)++; } STMT_END #define FILL_ADVANCE_NODE_ARG(ptr, op, arg) STMT_START { \ ARG_SET(ptr, arg); FILL_ADVANCE_NODE(ptr, op); (ptr) += 1; } STMT_END #define FILL_ADVANCE_NODE_2L_ARG(ptr, op, arg1, arg2) \ STMT_START { \ ARG_SET(ptr, arg1); \ ARG2L_SET(ptr, arg2); \ FILL_ADVANCE_NODE(ptr, op); \ (ptr) += 2; \ } STMT_END #define REG_MAGIC 0234 #define SIZE_ONLY cBOOL(RExC_emit == (regnode *) & RExC_emit_dummy) #define PASS1 SIZE_ONLY #define PASS2 (! SIZE_ONLY) /* An ANYOF node is basically a bitmap with the index being a code point. If * the bit for that code point is 1, the code point matches; if 0, it doesn't * match (complemented if inverted). There is an additional mechanism to deal * with cases where the bitmap is insufficient in and of itself. This #define * indicates if the bitmap does fully represent what this ANYOF node can match. * The ARG is set to this special value (since 0, 1, ... are legal, but will * never reach this high). */ #define ANYOF_ONLY_HAS_BITMAP ((U32) -1) /* When the bimap isn't completely sufficient for handling the ANYOF node, * flags (in node->flags of the ANYOF node) get set to indicate this. These * are perennially in short supply. Beyond several cases where warnings need * to be raised under certain circumstances, currently, there are six cases * where the bitmap alone isn't sufficient. We could use six flags to * represent the 6 cases, but to save flags bits, we play some games. The * cases are: * * 1) The bitmap has a compiled-in very finite size. So something else needs * to be used to specify if a code point that is too large for the bitmap * actually matches. The mechanism currently is a swash or inversion * list. ANYOF_ONLY_HAS_BITMAP, described above, being TRUE indicates * there are no matches of too-large code points. But if it is FALSE, * then almost certainly there are matches too large for the bitmap. (The * other cases, described below, either imply this one or are extremely * rare in practice.) So we can just assume that a too-large code point * will need something beyond the bitmap if ANYOF_ONLY_HAS_BITMAP is * FALSE, instead of having a separate flag for this. * 2) A subset of item 1) is if all possible code points outside the bitmap * match. This is a common occurrence when the class is complemented, * like /[^ij]/. Therefore a bit is reserved to indicate this, * rather than having an expensive swash created, * ANYOF_MATCHES_ALL_ABOVE_BITMAP. * 3) Under /d rules, it can happen that code points that are in the upper * latin1 range (\x80-\xFF or their equivalents on EBCDIC platforms) match * only if the runtime target string being matched against is UTF-8. For * example /[\w[:punct:]]/d. This happens only for posix classes (with a * couple of exceptions, like \d where it doesn't happen), and all such * ones also have above-bitmap matches. Thus, 3) implies 1) as well. * Note that /d rules are no longer encouraged; 'use 5.14' or higher * deselects them. But a flag is required so that they can be properly * handled. But it can be a shared flag: see 5) below. * 4) Also under /d rules, something like /[\Wfoo]/ will match everything in * the \x80-\xFF range, unless the string being matched against is UTF-8. * A swash could be created for this case, but this is relatively common, * and it turns out that it's all or nothing: if any one of these code * points matches, they all do. Hence a single bit suffices. We use a * shared flag that doesn't take up space by itself: * ANYOF_SHARED_d_MATCHES_ALL_NON_UTF8_NON_ASCII_non_d_WARN_SUPER. * This also implies 1), with one exception: [:^cntrl:]. * 5) A user-defined \p{} property may not have been defined by the time the * regex is compiled. In this case, we don't know until runtime what it * will match, so we have to assume it could match anything, including * code points that ordinarily would be in the bitmap. A flag bit is * necessary to indicate this , though it can be shared with the item 3) * flag, as that only occurs under /d, and this only occurs under non-d. * This case is quite uncommon in the field, and the /(?[ ...])/ construct * is a better way to accomplish what this feature does. This case also * implies 1). * ANYOF_SHARED_d_UPPER_LATIN1_UTF8_STRING_MATCHES_non_d_RUNTIME_USER_PROP * is the shared flag. * 6) /[foo]/il may have folds that are only valid if the runtime locale is a * UTF-8 one. These are quite rare, so it would be good to avoid the * expense of looking for them. But /l matching is slow anyway, and we've * traditionally not worried too much about its performance. And this * condition requires the ANYOFL_FOLD flag to be set, so testing for * that flag would be sufficient to rule out most cases of this. So it is * unclear if this should have a flag or not. But, this flag can be * shared with another, so it doesn't occupy extra space. * * At the moment, there is one spare bit, but this could be increased by * various tricks. * * If just one more bit is needed, at this writing it seems to khw that the * best choice would be to make ANYOF_MATCHES_ALL_ABOVE_BITMAP not a flag, but * something like * * #define ANYOF_MATCHES_ALL_ABOVE_BITMAP ((U32) -2) * * and access it through the ARG like ANYOF_ONLY_HAS_BITMAP is. This flag is * used by all ANYOF node types, and it could be used to avoid calling the * handler function, as the macro REGINCLASS in regexec.c does now for other * cases. * * Another possibility is to instead (or additionally) rename the ANYOF_POSIXL * flag to be ANYOFL_LARGE, to mean that the ANYOF node has an extra 32 bits * beyond what a regular one does. That's what it effectively means now, with * the extra space all for the POSIX class flags. But those classes actually * only occupy 30 bits, so the ANYOFL_FOLD and * ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD flags could be moved * to that extra space. The 30 bits in the extra word would indicate if a * posix class should be looked up or not. The downside of this is that ANYOFL * nodes with folding would always have to have the extra space allocated, even * if they didn't use the 30 posix bits. There isn't an SSC problem as all * SSCs are this large anyway. * * One could completely remove ANYOFL_LARGE and make all ANYOFL nodes large. * REGINCLASS would have to be modified so that if the node type were this, it * would call reginclass(), as the flag bit that indicates to do this now would * be gone. * * All told, 5 bits could be available for other uses if all of the above were * done. * * Some flags are not used in synthetic start class (SSC) nodes, so could be * shared should new flags be needed for SSCs, like SSC_MATCHES_EMPTY_STRING * now. */ /* If this is set, the result of the match should be complemented. regexec.c * is expecting this to be in the low bit. Never in an SSC */ #define ANYOF_INVERT 0x01 /* For the SSC node only, which cannot be inverted, so is shared with that bit. * This is used only during regex compilation. */ #define SSC_MATCHES_EMPTY_STRING ANYOF_INVERT /* Set if this is a regnode_charclass_posixl vs a regnode_charclass. This * is used for runtime \d, \w, [:posix:], ..., which are used only in locale * and the optimizer's synthetic start class. Non-locale \d, etc are resolved * at compile-time. Only set under /l; can be in SSC */ #define ANYOF_MATCHES_POSIXL 0x02 /* The fold is calculated and stored in the bitmap where possible at compile * time. However under locale, the actual folding varies depending on * what the locale is at the time of execution, so it has to be deferred until * then. Only set under /l; never in an SSC */ #define ANYOFL_FOLD 0x04 /* Shared bit set only with ANYOFL and SSC nodes: * If ANYOFL_FOLD is set, this means there are potential matches valid * only if the locale is a UTF-8 one. * If ANYOFL_FOLD is NOT set, this means to warn if the runtime locale * isn't a UTF-8 one (and the generated node assumes a UTF-8 locale). * None of INVERT, POSIXL, * ANYOF_SHARED_d_UPPER_LATIN1_UTF8_STRING_MATCHES_non_d_RUNTIME_USER_PROP * can be set. */ #define ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD 0x08 /* Convenience macros for teasing apart the meanings when reading the above bit * */ #define ANYOFL_SOME_FOLDS_ONLY_IN_UTF8_LOCALE(flags) \ ((flags & ( ANYOFL_FOLD /* Both bits are set */ \ |ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD)) \ == ( ANYOFL_FOLD \ |ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD)) #define ANYOFL_UTF8_LOCALE_REQD(flags) \ ((flags & ( ANYOFL_FOLD /* Only REQD bit is set */ \ |ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD)) \ == ANYOFL_SHARED_UTF8_LOCALE_fold_HAS_MATCHES_nonfold_REQD) /* Spare: Be sure to change ANYOF_FLAGS_ALL if this gets used 0x10 */ /* If set, the node matches every code point NUM_ANYOF_CODE_POINTS and above. * Can be in an SSC */ #define ANYOF_MATCHES_ALL_ABOVE_BITMAP 0x20 /* Shared bit: * Under /d it means the ANYOFD node matches more things if the target * string is encoded in UTF-8; any such things will be non-ASCII, * characters that are < 256, and can be accessed via the swash. * When not under /d, it means the ANYOF node contains a user-defined * property that wasn't yet defined at the time the regex was compiled, * and so must be looked up at runtime, by creating a swash * (These uses are mutually exclusive because a user-defined property is * specified by \p{}, and \p{} implies /u which deselects /d). The long macro * name is to make sure that you are cautioned about its shared nature. Only * the non-/d meaning can be in an SSC */ #define ANYOF_SHARED_d_UPPER_LATIN1_UTF8_STRING_MATCHES_non_d_RUNTIME_USER_PROP 0x40 /* Shared bit: * Under /d it means the ANYOFD node matches all non-ASCII Latin1 * characters when the target string is not in utf8. * When not under /d, it means the ANYOF node should raise a warning if * matching against an above-Unicode code point. * (These uses are mutually exclusive because the warning requires a \p{}, and * \p{} implies /u which deselects /d). An SSC node only has this bit set if * what is meant is the warning. The long macro name is to make sure that you * are cautioned about its shared nature */ #define ANYOF_SHARED_d_MATCHES_ALL_NON_UTF8_NON_ASCII_non_d_WARN_SUPER 0x80 #define ANYOF_FLAGS_ALL (0xff & ~0x10) #define ANYOF_LOCALE_FLAGS (ANYOFL_FOLD | ANYOF_MATCHES_POSIXL) /* These are the flags that apply to both regular ANYOF nodes and synthetic * start class nodes during construction of the SSC. During finalization of * the SSC, other of the flags may get added to it */ #define ANYOF_COMMON_FLAGS 0 /* Character classes for node->classflags of ANYOF */ /* Should be synchronized with a table in regprop() */ /* 2n should be the normal one, paired with its complement at 2n+1 */ #define ANYOF_ALPHA ((_CC_ALPHA) * 2) #define ANYOF_NALPHA ((ANYOF_ALPHA) + 1) #define ANYOF_ALPHANUMERIC ((_CC_ALPHANUMERIC) * 2) /* [[:alnum:]] isalnum(3), utf8::IsAlnum */ #define ANYOF_NALPHANUMERIC ((ANYOF_ALPHANUMERIC) + 1) #define ANYOF_ASCII ((_CC_ASCII) * 2) #define ANYOF_NASCII ((ANYOF_ASCII) + 1) #define ANYOF_BLANK ((_CC_BLANK) * 2) /* GNU extension: space and tab: non-vertical space */ #define ANYOF_NBLANK ((ANYOF_BLANK) + 1) #define ANYOF_CASED ((_CC_CASED) * 2) /* Pseudo class for [:lower:] or [:upper:] under /i */ #define ANYOF_NCASED ((ANYOF_CASED) + 1) #define ANYOF_CNTRL ((_CC_CNTRL) * 2) #define ANYOF_NCNTRL ((ANYOF_CNTRL) + 1) #define ANYOF_DIGIT ((_CC_DIGIT) * 2) /* \d */ #define ANYOF_NDIGIT ((ANYOF_DIGIT) + 1) #define ANYOF_GRAPH ((_CC_GRAPH) * 2) #define ANYOF_NGRAPH ((ANYOF_GRAPH) + 1) #define ANYOF_LOWER ((_CC_LOWER) * 2) #define ANYOF_NLOWER ((ANYOF_LOWER) + 1) #define ANYOF_PRINT ((_CC_PRINT) * 2) #define ANYOF_NPRINT ((ANYOF_PRINT) + 1) #define ANYOF_PUNCT ((_CC_PUNCT) * 2) #define ANYOF_NPUNCT ((ANYOF_PUNCT) + 1) #define ANYOF_SPACE ((_CC_SPACE) * 2) /* \s */ #define ANYOF_NSPACE ((ANYOF_SPACE) + 1) #define ANYOF_UPPER ((_CC_UPPER) * 2) #define ANYOF_NUPPER ((ANYOF_UPPER) + 1) #define ANYOF_WORDCHAR ((_CC_WORDCHAR) * 2) /* \w, PL_utf8_alnum, utf8::IsWord, ALNUM */ #define ANYOF_NWORDCHAR ((ANYOF_WORDCHAR) + 1) #define ANYOF_XDIGIT ((_CC_XDIGIT) * 2) #define ANYOF_NXDIGIT ((ANYOF_XDIGIT) + 1) /* pseudo classes below this, not stored in the class bitmap, but used as flags during compilation of char classes */ #define ANYOF_VERTWS ((_CC_VERTSPACE) * 2) #define ANYOF_NVERTWS ((ANYOF_VERTWS)+1) /* It is best if this is the last one, as all above it are stored as bits in a * bitmap, and it isn't part of that bitmap */ #if _CC_VERTSPACE != _HIGHEST_REGCOMP_DOT_H_SYNC # error Problem with handy.h _HIGHEST_REGCOMP_DOT_H_SYNC #define #endif #define ANYOF_POSIXL_MAX (ANYOF_VERTWS) /* So upper loop limit is written: * '< ANYOF_MAX' * Hence doesn't include VERTWS, as that * is a pseudo class */ #define ANYOF_MAX ANYOF_POSIXL_MAX #if (ANYOF_POSIXL_MAX > 32) /* Must fit in 32-bit word */ # error Problem with handy.h _CC_foo #defines #endif #define ANYOF_HORIZWS ((ANYOF_POSIXL_MAX)+2) /* = (ANYOF_NVERTWS + 1) */ #define ANYOF_NHORIZWS ((ANYOF_POSIXL_MAX)+3) #define ANYOF_UNIPROP ((ANYOF_POSIXL_MAX)+4) /* Used to indicate a Unicode property: \p{} or \P{} */ /* Backward source code compatibility. */ #define ANYOF_ALNUML ANYOF_ALNUM #define ANYOF_NALNUML ANYOF_NALNUM #define ANYOF_SPACEL ANYOF_SPACE #define ANYOF_NSPACEL ANYOF_NSPACE #define ANYOF_ALNUM ANYOF_WORDCHAR #define ANYOF_NALNUM ANYOF_NWORDCHAR /* Utility macros for the bitmap and classes of ANYOF */ #define ANYOF_FLAGS(p) ((p)->flags) #define ANYOF_BIT(c) (1U << ((c) & 7)) #define ANYOF_POSIXL_SET(p, c) (((regnode_charclass_posixl*) (p))->classflags |= (1U << (c))) #define ANYOF_CLASS_SET(p, c) ANYOF_POSIXL_SET((p), (c)) #define ANYOF_POSIXL_CLEAR(p, c) (((regnode_charclass_posixl*) (p))->classflags &= ~ (1U <<(c))) #define ANYOF_CLASS_CLEAR(p, c) ANYOF_POSIXL_CLEAR((p), (c)) #define ANYOF_POSIXL_TEST(p, c) (((regnode_charclass_posixl*) (p))->classflags & (1U << (c))) #define ANYOF_CLASS_TEST(p, c) ANYOF_POSIXL_TEST((p), (c)) #define ANYOF_POSIXL_ZERO(ret) STMT_START { ((regnode_charclass_posixl*) (ret))->classflags = 0; } STMT_END #define ANYOF_CLASS_ZERO(ret) ANYOF_POSIXL_ZERO(ret) /* Shifts a bit to get, eg. 0x4000_0000, then subtracts 1 to get 0x3FFF_FFFF */ #define ANYOF_POSIXL_SETALL(ret) STMT_START { ((regnode_charclass_posixl*) (ret))->classflags = ((1U << ((ANYOF_POSIXL_MAX) - 1))) - 1; } STMT_END #define ANYOF_CLASS_SETALL(ret) ANYOF_POSIXL_SETALL(ret) #define ANYOF_POSIXL_TEST_ANY_SET(p) \ ((ANYOF_FLAGS(p) & ANYOF_MATCHES_POSIXL) \ && (((regnode_charclass_posixl*)(p))->classflags)) #define ANYOF_CLASS_TEST_ANY_SET(p) ANYOF_POSIXL_TEST_ANY_SET(p) /* Since an SSC always has this field, we don't have to test for that; nor do * we want to because the bit isn't set for SSC during its construction */ #define ANYOF_POSIXL_SSC_TEST_ANY_SET(p) \ cBOOL(((regnode_ssc*)(p))->classflags) #define ANYOF_POSIXL_SSC_TEST_ALL_SET(p) /* Are all bits set? */ \ (((regnode_ssc*) (p))->classflags \ == ((1U << ((ANYOF_POSIXL_MAX) - 1))) - 1) #define ANYOF_POSIXL_TEST_ALL_SET(p) \ ((ANYOF_FLAGS(p) & ANYOF_MATCHES_POSIXL) \ && ((regnode_charclass_posixl*) (p))->classflags \ == ((1U << ((ANYOF_POSIXL_MAX) - 1))) - 1) #define ANYOF_POSIXL_OR(source, dest) STMT_START { (dest)->classflags |= (source)->classflags ; } STMT_END #define ANYOF_CLASS_OR(source, dest) ANYOF_POSIXL_OR((source), (dest)) #define ANYOF_POSIXL_AND(source, dest) STMT_START { (dest)->classflags &= (source)->classflags ; } STMT_END #define ANYOF_BITMAP_ZERO(ret) Zero(((regnode_charclass*)(ret))->bitmap, ANYOF_BITMAP_SIZE, char) #define ANYOF_BITMAP(p) ((regnode_charclass*)(p))->bitmap #define ANYOF_BITMAP_BYTE(p, c) BITMAP_BYTE(ANYOF_BITMAP(p), c) #define ANYOF_BITMAP_SET(p, c) (ANYOF_BITMAP_BYTE(p, c) |= ANYOF_BIT(c)) #define ANYOF_BITMAP_CLEAR(p,c) (ANYOF_BITMAP_BYTE(p, c) &= ~ANYOF_BIT(c)) #define ANYOF_BITMAP_TEST(p, c) cBOOL(ANYOF_BITMAP_BYTE(p, c) & ANYOF_BIT(c)) #define ANYOF_BITMAP_SETALL(p) \ memset (ANYOF_BITMAP(p), 255, ANYOF_BITMAP_SIZE) #define ANYOF_BITMAP_CLEARALL(p) \ Zero (ANYOF_BITMAP(p), ANYOF_BITMAP_SIZE) #define ANYOF_SKIP EXTRA_SIZE(regnode_charclass) #define ANYOF_POSIXL_SKIP EXTRA_SIZE(regnode_charclass_posixl) /* * Utility definitions. */ #ifndef CHARMASK # define UCHARAT(p) ((int)*(const U8*)(p)) #else # define UCHARAT(p) ((int)*(p)&CHARMASK) #endif #define EXTRA_SIZE(guy) ((sizeof(guy)-1)/sizeof(struct regnode)) #define REG_ZERO_LEN_SEEN 0x00000001 #define REG_LOOKBEHIND_SEEN 0x00000002 #define REG_GPOS_SEEN 0x00000004 /* spare */ #define REG_RECURSE_SEEN 0x00000020 #define REG_TOP_LEVEL_BRANCHES_SEEN 0x00000040 #define REG_VERBARG_SEEN 0x00000080 #define REG_CUTGROUP_SEEN 0x00000100 #define REG_RUN_ON_COMMENT_SEEN 0x00000200 #define REG_UNFOLDED_MULTI_SEEN 0x00000400 /* spare */ #define REG_UNBOUNDED_QUANTIFIER_SEEN 0x00001000 START_EXTERN_C #ifdef PLUGGABLE_RE_EXTENSION #include "re_nodes.h" #else #include "regnodes.h" #endif #ifndef PLUGGABLE_RE_EXTENSION #ifndef DOINIT EXTCONST regexp_engine PL_core_reg_engine; #else /* DOINIT */ EXTCONST regexp_engine PL_core_reg_engine = { Perl_re_compile, Perl_regexec_flags, Perl_re_intuit_start, Perl_re_intuit_string, Perl_regfree_internal, Perl_reg_numbered_buff_fetch, Perl_reg_numbered_buff_store, Perl_reg_numbered_buff_length, Perl_reg_named_buff, Perl_reg_named_buff_iter, Perl_reg_qr_package, #if defined(USE_ITHREADS) Perl_regdupe_internal, #endif Perl_re_op_compile }; #endif /* DOINIT */ #endif /* PLUGGABLE_RE_EXTENSION */ END_EXTERN_C /* .what is a character array with one character for each member of .data * The character describes the function of the corresponding .data item: * a - AV for paren_name_list under DEBUGGING * f - start-class data for regstclass optimization * l - start op for literal (?{EVAL}) item * L - start op for literal (?{EVAL}) item, with separate CV (qr//) * r - pointer to an embedded code-containing qr, e.g. /ab$qr/ * s - swash for Unicode-style character class, and the multicharacter * strings resulting from casefolding the single-character entries * in the character class * t - trie struct * u - trie struct's widecharmap (a HV, so can't share, must dup) * also used for revcharmap and words under DEBUGGING * T - aho-trie struct * S - sv for named capture lookup * 20010712 mjd@plover.com * (Remember to update re_dup() and pregfree() if you add any items.) */ struct reg_data { U32 count; U8 *what; void* data[1]; }; /* Code in S_to_utf8_substr() and S_to_byte_substr() in regexec.c accesses anchored* and float* via array indexes 0 and 1. */ #define anchored_substr substrs->data[0].substr #define anchored_utf8 substrs->data[0].utf8_substr #define anchored_offset substrs->data[0].min_offset #define anchored_end_shift substrs->data[0].end_shift #define float_substr substrs->data[1].substr #define float_utf8 substrs->data[1].utf8_substr #define float_min_offset substrs->data[1].min_offset #define float_max_offset substrs->data[1].max_offset #define float_end_shift substrs->data[1].end_shift #define check_substr substrs->data[2].substr #define check_utf8 substrs->data[2].utf8_substr #define check_offset_min substrs->data[2].min_offset #define check_offset_max substrs->data[2].max_offset #define check_end_shift substrs->data[2].end_shift #define RX_ANCHORED_SUBSTR(rx) (ReANY(rx)->anchored_substr) #define RX_ANCHORED_UTF8(rx) (ReANY(rx)->anchored_utf8) #define RX_FLOAT_SUBSTR(rx) (ReANY(rx)->float_substr) #define RX_FLOAT_UTF8(rx) (ReANY(rx)->float_utf8) /* trie related stuff */ /* a transition record for the state machine. the check field determines which state "owns" the transition. the char the transition is for is determined by offset from the owning states base field. the next field determines which state is to be transitioned to if any. */ struct _reg_trie_trans { U32 next; U32 check; }; /* a transition list element for the list based representation */ struct _reg_trie_trans_list_elem { U16 forid; U32 newstate; }; typedef struct _reg_trie_trans_list_elem reg_trie_trans_le; /* a state for compressed nodes. base is an offset into an array of reg_trie_trans array. If wordnum is nonzero the state is accepting. if base is zero then the state has no children (and will be accepting) */ struct _reg_trie_state { U16 wordnum; union { U32 base; reg_trie_trans_le* list; } trans; }; /* info per word; indexed by wordnum */ typedef struct { U16 prev; /* previous word in acceptance chain; eg in * zzz|abc|ab/ after matching the chars abc, the * accepted word is #2, and the previous accepted * word is #3 */ U32 len; /* how many chars long is this word? */ U32 accept; /* accept state for this word */ } reg_trie_wordinfo; typedef struct _reg_trie_state reg_trie_state; typedef struct _reg_trie_trans reg_trie_trans; /* anything in here that needs to be freed later should be dealt with in pregfree. refcount is first in both this and _reg_ac_data to allow a space optimisation in Perl_regdupe. */ struct _reg_trie_data { U32 refcount; /* number of times this trie is referenced */ U32 lasttrans; /* last valid transition element */ U16 *charmap; /* byte to charid lookup array */ reg_trie_state *states; /* state data */ reg_trie_trans *trans; /* array of transition elements */ char *bitmap; /* stclass bitmap */ U16 *jump; /* optional 1 indexed array of offsets before tail for the node following a given word. */ reg_trie_wordinfo *wordinfo; /* array of info per word */ U16 uniquecharcount; /* unique chars in trie (width of trans table) */ U32 startstate; /* initial state - used for common prefix optimisation */ STRLEN minlen; /* minimum length of words in trie - build/opt only? */ STRLEN maxlen; /* maximum length of words in trie - build/opt only? */ U32 prefixlen; /* #chars in common prefix */ U32 statecount; /* Build only - number of states in the states array (including the unused zero state) */ U32 wordcount; /* Build only */ #ifdef DEBUGGING STRLEN charcount; /* Build only */ #endif }; /* There is one (3 under DEBUGGING) pointers that logically belong in this structure, but are held outside as they need duplication on thread cloning, whereas the rest of the structure can be read only: HV *widecharmap; code points > 255 to charid #ifdef DEBUGGING AV *words; Array of words contained in trie, for dumping AV *revcharmap; Map of each charid back to its character representation #endif */ #define TRIE_WORDS_OFFSET 2 typedef struct _reg_trie_data reg_trie_data; /* refcount is first in both this and _reg_trie_data to allow a space optimisation in Perl_regdupe. */ struct _reg_ac_data { U32 refcount; U32 trie; U32 *fail; reg_trie_state *states; }; typedef struct _reg_ac_data reg_ac_data; /* ANY_BIT doesn't use the structure, so we can borrow it here. This is simpler than refactoring all of it as wed end up with three different sets... */ #define TRIE_BITMAP(p) (((reg_trie_data *)(p))->bitmap) #define TRIE_BITMAP_BYTE(p, c) BITMAP_BYTE(TRIE_BITMAP(p), c) #define TRIE_BITMAP_SET(p, c) (TRIE_BITMAP_BYTE(p, c) |= ANYOF_BIT((U8)c)) #define TRIE_BITMAP_CLEAR(p,c) (TRIE_BITMAP_BYTE(p, c) &= ~ANYOF_BIT((U8)c)) #define TRIE_BITMAP_TEST(p, c) (TRIE_BITMAP_BYTE(p, c) & ANYOF_BIT((U8)c)) #define IS_ANYOF_TRIE(op) ((op)==TRIEC || (op)==AHOCORASICKC) #define IS_TRIE_AC(op) ((op)>=AHOCORASICK) #define BITMAP_BYTE(p, c) (( (U8*) p) [ ( ( (UV) (c)) >> 3) ] ) #define BITMAP_TEST(p, c) (BITMAP_BYTE(p, c) & ANYOF_BIT((U8)c)) /* these defines assume uniquecharcount is the correct variable, and state may be evaluated twice */ #define TRIE_NODENUM(state) (((state)-1)/(trie->uniquecharcount)+1) #define SAFE_TRIE_NODENUM(state) ((state) ? (((state)-1)/(trie->uniquecharcount)+1) : (state)) #define TRIE_NODEIDX(state) ((state) ? (((state)-1)*(trie->uniquecharcount)+1) : (state)) #ifdef DEBUGGING #define TRIE_CHARCOUNT(trie) ((trie)->charcount) #else #define TRIE_CHARCOUNT(trie) (trie_charcount) #endif #define RE_TRIE_MAXBUF_INIT 65536 #define RE_TRIE_MAXBUF_NAME "\022E_TRIE_MAXBUF" #define RE_DEBUG_FLAGS "\022E_DEBUG_FLAGS" /* RE_DEBUG_FLAGS is used to control what debug output is emitted its divided into three groups of options, some of which interact. The three groups are: Compile, Execute, Extra. There is room for a further group, as currently only the low three bytes are used. Compile Options: PARSE PEEP TRIE PROGRAM OFFSETS Execute Options: INTUIT MATCH TRIE Extra Options TRIE OFFSETS If you modify any of these make sure you make corresponding changes to re.pm, especially to the documentation. */ /* Compile */ #define RE_DEBUG_COMPILE_MASK 0x0000FF #define RE_DEBUG_COMPILE_PARSE 0x000001 #define RE_DEBUG_COMPILE_OPTIMISE 0x000002 #define RE_DEBUG_COMPILE_TRIE 0x000004 #define RE_DEBUG_COMPILE_DUMP 0x000008 #define RE_DEBUG_COMPILE_FLAGS 0x000010 #define RE_DEBUG_COMPILE_TEST 0x000020 /* Execute */ #define RE_DEBUG_EXECUTE_MASK 0x00FF00 #define RE_DEBUG_EXECUTE_INTUIT 0x000100 #define RE_DEBUG_EXECUTE_MATCH 0x000200 #define RE_DEBUG_EXECUTE_TRIE 0x000400 /* Extra */ #define RE_DEBUG_EXTRA_MASK 0xFF0000 #define RE_DEBUG_EXTRA_TRIE 0x010000 #define RE_DEBUG_EXTRA_OFFSETS 0x020000 #define RE_DEBUG_EXTRA_OFFDEBUG 0x040000 #define RE_DEBUG_EXTRA_STATE 0x080000 #define RE_DEBUG_EXTRA_OPTIMISE 0x100000 #define RE_DEBUG_EXTRA_BUFFERS 0x400000 #define RE_DEBUG_EXTRA_GPOS 0x800000 /* combined */ #define RE_DEBUG_EXTRA_STACK 0x280000 #define RE_DEBUG_FLAG(x) (re_debug_flags & x) /* Compile */ #define DEBUG_COMPILE_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_COMPILE_MASK) x ) #define DEBUG_PARSE_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_COMPILE_PARSE) x ) #define DEBUG_OPTIMISE_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_COMPILE_OPTIMISE) x ) #define DEBUG_PARSE_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_COMPILE_PARSE) x ) #define DEBUG_DUMP_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_COMPILE_DUMP) x ) #define DEBUG_TRIE_COMPILE_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_COMPILE_TRIE) x ) #define DEBUG_FLAGS_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_COMPILE_FLAGS) x ) #define DEBUG_TEST_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_COMPILE_TEST) x ) /* Execute */ #define DEBUG_EXECUTE_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXECUTE_MASK) x ) #define DEBUG_INTUIT_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXECUTE_INTUIT) x ) #define DEBUG_MATCH_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXECUTE_MATCH) x ) #define DEBUG_TRIE_EXECUTE_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXECUTE_TRIE) x ) /* Extra */ #define DEBUG_EXTRA_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXTRA_MASK) x ) #define DEBUG_OFFSETS_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXTRA_OFFSETS) x ) #define DEBUG_STATE_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXTRA_STATE) x ) #define DEBUG_STACK_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXTRA_STACK) x ) #define DEBUG_BUFFERS_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXTRA_BUFFERS) x ) #define DEBUG_OPTIMISE_MORE_r(x) DEBUG_r( \ if ((RE_DEBUG_EXTRA_OPTIMISE|RE_DEBUG_COMPILE_OPTIMISE) == \ (re_debug_flags & (RE_DEBUG_EXTRA_OPTIMISE|RE_DEBUG_COMPILE_OPTIMISE)) ) x ) #define MJD_OFFSET_DEBUG(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXTRA_OFFDEBUG) \ Perl_warn_nocontext x ) #define DEBUG_TRIE_COMPILE_MORE_r(x) DEBUG_TRIE_COMPILE_r( \ if (re_debug_flags & RE_DEBUG_EXTRA_TRIE) x ) #define DEBUG_TRIE_EXECUTE_MORE_r(x) DEBUG_TRIE_EXECUTE_r( \ if (re_debug_flags & RE_DEBUG_EXTRA_TRIE) x ) #define DEBUG_TRIE_r(x) DEBUG_r( \ if (re_debug_flags & (RE_DEBUG_COMPILE_TRIE \ | RE_DEBUG_EXECUTE_TRIE )) x ) #define DEBUG_GPOS_r(x) DEBUG_r( \ if (re_debug_flags & RE_DEBUG_EXTRA_GPOS) x ) /* initialization */ /* get_sv() can return NULL during global destruction. */ #define GET_RE_DEBUG_FLAGS DEBUG_r({ \ SV * re_debug_flags_sv = NULL; \ re_debug_flags_sv = PL_curcop ? get_sv(RE_DEBUG_FLAGS, GV_ADD) : NULL; \ if (re_debug_flags_sv) { \ if (!SvIOK(re_debug_flags_sv)) \ sv_setuv(re_debug_flags_sv, RE_DEBUG_COMPILE_DUMP | RE_DEBUG_EXECUTE_MASK ); \ re_debug_flags=SvIV(re_debug_flags_sv); \ }\ }) #ifdef DEBUGGING #define GET_RE_DEBUG_FLAGS_DECL VOL IV re_debug_flags = 0; \ PERL_UNUSED_VAR(re_debug_flags); GET_RE_DEBUG_FLAGS; #define RE_PV_COLOR_DECL(rpv,rlen,isuni,dsv,pv,l,m,c1,c2) \ const char * const rpv = \ pv_pretty((dsv), (pv), (l), \ (PL_dump_re_max_len) ? PL_dump_re_max_len : (m), \ PL_colors[(c1)],PL_colors[(c2)], \ PERL_PV_ESCAPE_RE|PERL_PV_ESCAPE_NONASCII |((isuni) ? PERL_PV_ESCAPE_UNI : 0) ); \ const int rlen = SvCUR(dsv) #define RE_SV_ESCAPE(rpv,isuni,dsv,sv,m) \ const char * const rpv = \ pv_pretty((dsv), (SvPV_nolen_const(sv)), (SvCUR(sv)), \ (PL_dump_re_max_len) ? PL_dump_re_max_len : (m), \ PL_colors[(c1)],PL_colors[(c2)], \ PERL_PV_ESCAPE_RE|PERL_PV_ESCAPE_NONASCII |((isuni) ? PERL_PV_ESCAPE_UNI : 0) ) #define RE_PV_QUOTED_DECL(rpv,isuni,dsv,pv,l,m) \ const char * const rpv = \ pv_pretty((dsv), (pv), (l), \ (PL_dump_re_max_len) ? PL_dump_re_max_len : (m), \ PL_colors[0], PL_colors[1], \ ( PERL_PV_PRETTY_QUOTE | PERL_PV_ESCAPE_RE | PERL_PV_ESCAPE_NONASCII | PERL_PV_PRETTY_ELLIPSES | \ ((isuni) ? PERL_PV_ESCAPE_UNI : 0)) \ ) #define RE_SV_DUMPLEN(ItEm) (SvCUR(ItEm) - (SvTAIL(ItEm)!=0)) #define RE_SV_TAIL(ItEm) (SvTAIL(ItEm) ? "$" : "") #else /* if not DEBUGGING */ #define GET_RE_DEBUG_FLAGS_DECL #define RE_PV_COLOR_DECL(rpv,rlen,isuni,dsv,pv,l,m,c1,c2) #define RE_SV_ESCAPE(rpv,isuni,dsv,sv,m) #define RE_PV_QUOTED_DECL(rpv,isuni,dsv,pv,l,m) #define RE_SV_DUMPLEN(ItEm) #define RE_SV_TAIL(ItEm) #endif /* DEBUG RELATED DEFINES */ typedef enum { TRADITIONAL_BOUND = _CC_WORDCHAR, GCB_BOUND, LB_BOUND, SB_BOUND, WB_BOUND } bound_type; /* * ex: set ts=8 sts=4 sw=4 et: */