1#@!#!123s

: / proc / self / root / lib / dracut / modules.d / 35network-legacy /
Filename : ifup.sh
back
#!/bin/sh
#
# We don't need to check for ip= errors here, that is handled by the
# cmdline parser script
#
# without $2 means this is for real netroot case
# or it is for manually bring up network ie. for kdump scp vmcore
PATH=/usr/sbin:/usr/bin:/sbin:/bin

type getarg >/dev/null 2>&1 || . /lib/dracut-lib.sh
type ip_to_var >/dev/null 2>&1 || . /lib/net-lib.sh

# Huh? No $1?
[ -z "$1" ] && exit 1

# $netif reads easier than $1
netif=$1

# loopback is always handled the same way
if [ "$netif" = "lo" ] ; then
    ip link set lo up
    ip addr add 127.0.0.1/8 dev lo
    exit 0
fi

# Run dhclient
do_dhcp() {
    # dhclient-script will mark the netif up and generate the online
    # event for nfsroot
    # XXX add -V vendor class and option parsing per kernel

    local _COUNT=0
    local _timeout=$(getargs rd.net.timeout.dhcp=)
    local _DHCPRETRY=$(getargs rd.net.dhcp.retry=)
    _DHCPRETRY=${_DHCPRETRY:-1}

    [ -e /tmp/dhclient.$netif.pid ] && return 0

    if ! iface_has_carrier $netif; then
        warn "No carrier detected on interface $netif"
        return 1
    fi

    if [ ! -e /run/NetworkManager/conf.d/10-dracut-dhclient.conf ]; then
        mkdir -p /run/NetworkManager/conf.d
        echo '[main]' > /run/NetworkManager/conf.d/10-dracut-dhclient.conf
        echo 'dhcp=dhclient' >>/run/NetworkManager/conf.d/10-dracut-dhclient.conf
    fi

    while [ $_COUNT -lt $_DHCPRETRY ]; do
        info "Starting dhcp for interface $netif"
        dhclient "$@" \
                 ${_timeout:+--timeout $_timeout} \
                 -q \
                 -1 \
                 -cf /etc/dhclient.conf \
                 -pf /tmp/dhclient.$netif.pid \
                 -lf /tmp/dhclient.$netif.lease \
                 $netif \
            && return 0
        _COUNT=$(($_COUNT+1))
        [ $_COUNT -lt $_DHCPRETRY ] && sleep 1
    done
    warn "dhcp for interface $netif failed"
    # nuke those files since we failed; we might retry dhcp again if it's e.g.
    # `ip=dhcp,dhcp6` and we check for the PID file at the top
    rm -f /tmp/dhclient.$netif.{pid,lease}
    return 1
}

load_ipv6() {
    [ -d /proc/sys/net/ipv6 ] && return
    modprobe ipv6
    i=0
    while [ ! -d /proc/sys/net/ipv6 ]; do
        i=$(($i+1))
        [ $i -gt 10 ] && break
        sleep 0.1
    done
}

do_ipv6auto() {
    local ret
    load_ipv6
    echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
    echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
    echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
    linkup $netif
    wait_for_ipv6_auto $netif
    ret=$?

    [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname

    return $ret
}

# Handle static ip configuration
do_static() {
    strglobin $ip '*:*:*' && load_ipv6

    if ! iface_has_carrier "$netif"; then
        warn "No carrier detected on interface $netif"
        return 1
    elif ! linkup "$netif"; then
        warn "Could not bring interface $netif up!"
        return 1
    fi

    ip route get "$ip" 2>/dev/null | {
        read a rest
        if [ "$a" = "local" ]; then
            warn "Not assigning $ip to interface $netif, cause it is already assigned!"
            return 1
        fi
        return 0
    } || return 1

    [ -n "$macaddr" ] && ip link set address $macaddr dev $netif
    [ -n "$mtu" ] && ip link set mtu $mtu dev $netif
    if strglobin $ip '*:*:*'; then
        # note no ip addr flush for ipv6
        ip addr add $ip/$mask ${srv:+peer $srv} dev $netif
        echo 0 > /proc/sys/net/ipv6/conf/$netif/forwarding
        echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_ra
        echo 1 > /proc/sys/net/ipv6/conf/$netif/accept_redirects
        wait_for_ipv6_dad $netif
    else
        if [ -z "$srv" ]; then
            if command -v arping2 >/dev/null; then
                if arping2 -q -C 1 -c 2 -I $netif -0 $ip ; then
                    warn "Duplicate address detected for $ip for interface $netif."
                    return 1
                fi
            else
                if ! arping -f -q -D -c 2 -I $netif $ip ; then
                    warn "Duplicate address detected for $ip for interface $netif."
                    return 1
                fi
            fi
        fi
        ip addr flush dev $netif
        ip addr add $ip/$mask ${srv:+peer $srv} brd + dev $netif
    fi

    [ -n "$gw" ] && echo ip route replace default via $gw dev $netif > /tmp/net.$netif.gw
    [ -n "$hostname" ] && echo "echo $hostname > /proc/sys/kernel/hostname" > /tmp/net.$netif.hostname

    return 0
}

get_vid() {
    case "$1" in
    vlan*)
        echo ${1#vlan}
        ;;
    *.*)
        echo ${1##*.}
        ;;
    esac
}

# check, if we need VLAN's for this interface
if [ -z "$DO_VLAN_PHY" ] && [ -e /tmp/vlan.${netif}.phy ]; then
    unset DO_VLAN
    NO_AUTO_DHCP=yes DO_VLAN_PHY=yes ifup "$netif"
    modprobe -b -q 8021q

    for i in /tmp/vlan.*.${netif}; do
        [ -e "$i" ] || continue
        unset vlanname
        unset phydevice
        . "$i"
        if [ -n "$vlanname" ]; then
            linkup "$phydevice"
            ip link add dev "$vlanname" link "$phydevice" type vlan id "$(get_vid $vlanname)"
            ifup "$vlanname"
        fi
    done
    exit 0
fi

# Check, if interface is VLAN interface
if ! [ -e /tmp/vlan.${netif}.phy ]; then
    for i in /tmp/vlan.${netif}.*; do
        [ -e "$i" ] || continue
        export DO_VLAN=yes
        break
    done
fi


# bridge this interface?
if [ -z "$NO_BRIDGE_MASTER" ]; then
    for i in /tmp/bridge.*.info; do
        [ -e "$i" ] || continue
        unset bridgeslaves
        unset bridgename
        . "$i"
        for ethname in $bridgeslaves ; do
            [ "$netif" != "$ethname" ] && continue

            NO_BRIDGE_MASTER=yes NO_AUTO_DHCP=yes ifup $ethname
            linkup $ethname
            if [ ! -e /tmp/bridge.$bridgename.up ]; then
                ip link add name $bridgename type bridge
                echo 0 > /sys/devices/virtual/net/$bridgename/bridge/forward_delay
                > /tmp/bridge.$bridgename.up
            fi
            ip link set dev $ethname master $bridgename
            ifup $bridgename
            exit 0
        done
    done
fi

# enslave this interface to bond?
if [ -z "$NO_BOND_MASTER" ]; then
    for i in /tmp/bond.*.info; do
        [ -e "$i" ] || continue
        unset bondslaves
        unset bondname
        . "$i"
        for slave in $bondslaves ; do
            [ "$netif" != "$slave" ] && continue

            # already setup
            [ -e /tmp/bond.$bondname.up ] && exit 0

            # wait for all slaves to show up
            for slave in $bondslaves ; do
                # try to create the slave (maybe vlan or bridge)
                NO_BOND_MASTER=yes NO_AUTO_DHCP=yes ifup $slave

                if ! ip link show dev $slave >/dev/null 2>&1; then
                    # wait for the last slave to show up
                    exit 0
                fi
            done

            modprobe -q -b bonding
            echo "+$bondname" >  /sys/class/net/bonding_masters 2>/dev/null
            ip link set $bondname down

            # Stolen from ifup-eth
            # add the bits to setup driver parameters here
            for arg in $bondoptions ; do
                key=${arg%%=*};
                value=${arg##*=};
                # %{value:0:1} is replaced with non-bash specific construct
                if [ "${key}" = "arp_ip_target" -a "${#value}" != "0" -a "+${value%%+*}" != "+" ]; then
                    OLDIFS=$IFS;
                    IFS=',';
                    for arp_ip in $value; do
                        echo +$arp_ip > /sys/class/net/${bondname}/bonding/$key
                    done
                    IFS=$OLDIFS;
                else
                    echo $value > /sys/class/net/${bondname}/bonding/$key
                fi
            done

            linkup $bondname

            for slave in $bondslaves ; do
                cat /sys/class/net/$slave/address > /tmp/net.${bondname}.${slave}.hwaddr
                ip link set $slave down
                echo "+$slave" > /sys/class/net/$bondname/bonding/slaves
                linkup $slave
            done

            # Set mtu on bond master
            [ -n "$bondmtu" ] && ip link set mtu $bondmtu dev $bondname

            # add the bits to setup the needed post enslavement parameters
            for arg in $bondoptions ; do
                key=${arg%%=*};
                value=${arg##*=};
                if [ "${key}" = "primary" ]; then
                    echo $value > /sys/class/net/${bondname}/bonding/$key
                fi
            done

            > /tmp/bond.$bondname.up

            NO_BOND_MASTER=yes ifup $bondname
            exit $?
        done
    done
fi

if [ -z "$NO_TEAM_MASTER" ]; then
    for i in /tmp/team.*.info; do
        [ -e "$i" ] || continue
        unset teammaster
        unset teamslaves
        . "$i"
        for slave in $teamslaves ; do
            [ "$netif" != "$slave" ] && continue

            [ -e /tmp/team.$teammaster.up ] && exit 0

            # wait for all slaves to show up
            for slave in $teamslaves ; do
                # try to create the slave (maybe vlan or bridge)
                NO_TEAM_MASTER=yes NO_AUTO_DHCP=yes ifup $slave

                if ! ip link show dev $slave >/dev/null 2>&1; then
                    # wait for the last slave to show up
                    exit 0
                fi
            done

            if [ ! -e /tmp/team.$teammaster.up ] ; then
                # We shall only bring up those _can_ come up
                # in case of some slave is gone in active-backup mode
                working_slaves=""
                for slave in $teamslaves ; do
                    teamdctl ${teammaster} port present ${slave} 2>/dev/null \
                        && continue
                    ip link set dev $slave up 2>/dev/null
                    if wait_for_if_up $slave; then
                        working_slaves="$working_slaves$slave "
                    fi
                done
                # Do not add slaves now
                teamd -d -U -n -N -t $teammaster -f /etc/teamd/${teammaster}.conf
                for slave in $working_slaves; do
                    # team requires the slaves to be down before joining team
                    ip link set dev $slave down
                    (
                        unset TEAM_PORT_CONFIG
                        _hwaddr=$(cat /sys/class/net/$slave/address)
                        _subchannels=$(iface_get_subchannels "$slave")
                        if [ -n "$_hwaddr" ] && [ -e "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf" ]; then
                            . "/etc/sysconfig/network-scripts/mac-${_hwaddr}.conf"
                        elif [ -n "$_subchannels" ] && [ -e "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf" ]; then
                            . "/etc/sysconfig/network-scripts/ccw-${_subchannels}.conf"
                        elif [ -e "/etc/sysconfig/network-scripts/ifcfg-${slave}" ]; then
                            . "/etc/sysconfig/network-scripts/ifcfg-${slave}"
                        fi

                        if [ -n "${TEAM_PORT_CONFIG}" ]; then
                            /usr/bin/teamdctl ${teammaster} port config update ${slave} "${TEAM_PORT_CONFIG}"
                        fi
                    )
                    teamdctl $teammaster port add $slave
                done

                ip link set dev $teammaster up

                > /tmp/team.$teammaster.up
                NO_TEAM_MASTER=yes ifup $teammaster
                exit $?
            fi
        done
    done
fi

# all synthetic interfaces done.. now check if the interface is available
if ! ip link show dev $netif >/dev/null 2>&1; then
    exit 1
fi

# disable manual ifup while netroot is set for simplifying our logic
# in netroot case we prefer netroot to bringup $netif automaticlly
[ -n "$2" -a "$2" = "-m" ] && [ -z "$netroot" ] && manualup="$2"

if [ -n "$manualup" ]; then
    >/tmp/net.$netif.manualup
    rm -f /tmp/net.${netif}.did-setup
else
    [ -e /tmp/net.${netif}.did-setup ] && exit 0
    [ -z "$DO_VLAN" ] && \
    [ -e /sys/class/net/$netif/address ] && \
        [ -e /tmp/net.$(cat /sys/class/net/$netif/address).did-setup ] && exit 0
fi


# No ip lines default to dhcp
ip=$(getarg ip)

if [ -z "$NO_AUTO_DHCP" ] && [ -z "$ip" ]; then
    if [ "$netroot" = "dhcp6" ]; then
        do_dhcp -6
    else
        do_dhcp -4
    fi

    for s in $(getargs nameserver); do
        [ -n "$s" ] || continue
        echo nameserver $s >> /tmp/net.$netif.resolv.conf
    done
fi


# Specific configuration, spin through the kernel command line
# looking for ip= lines
for p in $(getargs ip=); do
    ip_to_var $p
    # skip ibft
    [ "$autoconf" = "ibft" ] && continue

    case "$dev" in
        ??:??:??:??:??:??)  # MAC address
            _dev=$(iface_for_mac $dev)
            [ -n "$_dev" ] && dev="$_dev"
            ;;
        ??-??-??-??-??-??)  # MAC address in BOOTIF form
            _dev=$(iface_for_mac $(fix_bootif $dev))
            [ -n "$_dev" ] && dev="$_dev"
            ;;
    esac

    # If this option isn't directed at our interface, skip it
    if [ -n "$dev" ]; then
        if [ "$dev" != "$netif" ]; then
            [ ! -e "/sys/class/net/$dev" ] \
                && warn "Network interface '$dev' does not exist!"
            continue
        fi
    else
        iface_is_enslaved "$netif" && continue
    fi

    # Store config for later use
    for i in ip srv gw mask hostname macaddr mtu dns1 dns2; do
        eval '[ "$'$i'" ] && echo '$i'="$'$i'"'
    done > /tmp/net.$netif.override

    for autoopt in $(str_replace "$autoconf" "," " "); do
        case $autoopt in
            dhcp|on|any)
                do_dhcp -4 ;;
            dhcp6)
                load_ipv6
                do_dhcp -6 ;;
            auto6)
                do_ipv6auto ;;
            either6)
                do_ipv6auto || do_dhcp -6 ;;
            *)
                do_static ;;
        esac
    done
    ret=$?

    # setup nameserver
    for s in "$dns1" "$dns2" $(getargs nameserver); do
        [ -n "$s" ] || continue
        echo nameserver $s >> /tmp/net.$netif.resolv.conf
    done

    if [ $ret -eq 0 ]; then
        > /tmp/net.${netif}.up

        if  [ -z "$DO_VLAN" ] && [ -e /sys/class/net/${netif}/address ]; then
            > /tmp/net.$(cat /sys/class/net/${netif}/address).up
        fi

        # and finally, finish interface set up if there isn't already a script
        # to do so (which is the case in the dhcp path)
        if [ ! -e $hookdir/initqueue/setup_net_$netif.sh ]; then
                setup_net $netif
                source_hook initqueue/online $netif
                if [ -z "$manualup" ]; then
                    /sbin/netroot $netif
                fi
        fi

        exit $ret
    fi
done

# no ip option directed at our interface?
if [ -z "$NO_AUTO_DHCP" ] && [ ! -e /tmp/net.${netif}.up ]; then
    if [ -e /tmp/net.bootdev ]; then
        BOOTDEV=$(cat /tmp/net.bootdev)
        if [ "$netif" = "$BOOTDEV" ] || [ "$BOOTDEV" = "$(cat /sys/class/net/${netif}/address)" ]; then
            load_ipv6
            do_dhcp
        fi
    else
        if getargs 'ip=dhcp6'; then
            load_ipv6
            do_dhcp -6
        fi
        if getargs 'ip=dhcp'; then
            do_dhcp -4
        fi
    fi
fi

exit 0